How to connect Panasonic PBX systems to the PC via LAN port?

You can connect your Panasonic PBX via LAN Port to Call Accounting Panasonic PBX collector software installed the computer.If your PBX one of the following models :


PBX Settings

Step 1- Go to Maintenance – Main.
Step 2- Set Port to LAN.
Step 3- Under Print Information select which items you would like to display in the SMDR Printout.
Step 4- Date format: MM-DD-YY.
Step 5- Time format: 24H.

Panasonic KX-TDA-smdr-settings - Call Accounting Panasonic PBX

Step 6- Click on SMDR Options tab.
Step 7- Note the default SMDR Port Number and Password.

Panasonic KX-TDA-smdr-settings-2 Call Accounting Panasonic PBX

Step 8- Configure collector software user and password and IP address.
By default, the Panasonic system requires a username/password (default: SMDR/PCCSMDR)

Panasonic NS Series SMDR settings

1-Login to your web maintenance console.
2-Go to 11-Maintenance section and click on main.

NS500 call accounting SMDR settings


3-Make sure following settings are correct:
Type => to A or C. Make sure you have same settings in PBXDom side.
Port => LAN(TELNET)
Outgoing Call => Print
Incoming Call => Print
Intercom Call => Print

4-Go to SMDR options tab.

NS500,NS700,NS1000 web maintenance console SMDR settings

5-Make sure about SMDR port number and SMDR password.
Default SMDR port number is 2300
Default SMDR password is PCCSMDR

For more information read TCP/IP client connection.

Also, you can read the following pages about Call Accounting Software for Panasonic PBXes:


Did this answer your question?